Multipupose MIDI and LTC Timecode Interface

    MIDI notes and MIDI show control
    MIDI Timecode, EBU25, SMPTE30, NTSC30, Film 24

Connects via USB to MagicQ PC/Mac or MagicQ consoles to provide support for MIDI in, MIDI out, LTC in, LTC out.

All the common timecode protocols including EBU25, SMPTE30, NTSC30, Film 24.

MIDI input can be used to trigger playbacks and other features via MIDI notes.  MagicQ can be programmed to trigger specific playbacks/cues/macros from specific MIDI notes*.

The Interface supports standard MIDI Show Control for triggering Cues and Cue Stacks.  This enables MagicQ to be used together with other consoles/software and systems that support the MIDI Show Control protocol.

MIDI Notes commands can be output from each Cue in Cue Stacks using simple MIDI strings.

MagicQ Pro2014 console's have a built in MIDI/Timecode module as standard with MIDI in, MIDI out, LTC in and LTC out..

MagicQ MIDI/Timecode Interface comes with a USB cable and instruction sheet.

For security reasons MagicQ limits the number of playbacks that can be controlled using MIDI and the remote protocols. On MagicQ consoles PB1 to PB34 can be controlled. On MagicQ PC, playbacks PB1 to PB10 can be controlled.

Features:

MIDI in DIN
MIDI out DIN
MIDI thru DIN
LTC in via 3 pin XLR
LTC out via phono connector
Triggering of MagicQ features via MIDI notes
Triggering of MagicQ Cues / Cue Stacks via MIDI Show Control
Power status LED
Connection status LED